简介
Support for StreamDeck 15 buttons with tilt degree adjustment. It is designed to be clamped on the base of the monintor (maximum 60mm monitor base width). Required for assembly: 3 Nuts 4mm (one for central axle and 2 others for rear monitor attachment). 1 Nut 3mm to fit the center screw 2 screws 4x60mm (depending on the bottom of the monitor base you will need either shorter or longer ones) 1 Screw 3x20mm for central fastening 1 Screw 4x20mm for the central shaft
About this model
StreamDeck support is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
