简介
Simple pulley using a 608 bearing, no extra hardware required. It's designed for a 18mm diameter rope. The axle should provide enough friction to keep everything in place but also allow the block to slide open if needed. If the axle is a bit loose there is a 2mm hole at the end, you can pass a bit of filament through it and fuse it in place. Of course, be careful with what you use this for and don't put yourself at risk.
About this model
Pulley / snatch block is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
