IRobot Braava Jet 250 Wall Mount

Free STL Gadgets

19 views

This model is hosted on Cults3D. Files, images and license details belong to the original creator.

Description

iRobot Braava Jet 250 Wall Mount that I designed to store the robot mop out of the way on the wall. May also fir the Jet 240 but I don't have this to test. Holds the robot upright using the battery mount and is a friction fit. Make sure there is no water left before storing otherwise it will leak out. There are Four screw holes to attach to the wall as the robot is reasonably heavy and so I would not trust sticky pads to be strong enough unless you have a clean surface to stick to. Printed at 25% gyroid infill with 4 walls for strength as the part is constantly under the weight of the robot. Printed in orientation as per the STL (i.e. flat wall part down on the plate) with support for critical areas only.

About this model

IRobot Braava Jet 250 Wall Mount is a free 3D model in the Gadgets category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.