Brackets for led matrix

Brackets for led matrix

無料 STL 収納・整理
  • 18 閲覧

このモデルは Cults3D で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。

Cults3D で見る ↗

説明

This bracket fits the 64x32 RGB LED Matrix - 6mm pitch (https://www.adafruit.com/product/2276) from Adafruit. I am using this display with an Adafruit Matrix Portal (https://www.adafruit.com/product/4745), but wanted to move the board further inside and needed a harness to hold it while connecting it to the HUB 75 plug using jumper wires (https://smile.amazon.com/Elegoo-EL-CP-004-Multicolored-Breadboard-arduino/dp/B01EV70C78/ref=pd_sbs_1?pd_rd_w=VCvAo&pf_rd_p=2419a049-62bf-452e-b0d0-ca5b7e35a7b4&pf_rd_r=Q2HE935KPQS32PKH8ZBT&pd_rd_r=f78c02c9-5f40-421d-bb21-1b7b724c5086&pd_rd_wg=2rhGP&pd_rd_i=B01EV70C78&psc=1). Adafruit Matrix Portal - CircuitPython Powered Internet Display (https://www.adafruit.com/product/4745) I will be hanging it on the wall to replace my existing kitchen clock. 8 x M3 10mm screws are required to connect the brackets to the display. In order to protect and diffuse the LEDs, I ordered the Black LED Diffusion Acrylic Panel from tapplastics.com (https://www.tapplastics.com) Dimensions: 385mm x 190mm x 13mm / 15.2” x 7.5” x 0.5” I used simple black electric tape to secure the acrylic to the front face. The OnShape (https://onshape.com) project used to generate these STLs is available here (https://cad.onshape.com/documents/953180e31ba60af4133e9fe2/w/20c4288c43ab9a7818067a0e/e/a7793e8bf65426e9d0588a6d).

About this model

Brackets for led matrix is a 無料 3D model in the 収納・整理 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

類似モデル