Brackets for led matrix

Ücretsiz STL Düzenleyici ve Saklama

19 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Açıklama

This bracket fits the 64x32 RGB LED Matrix - 6mm pitch (https://www.adafruit.com/product/2276) from Adafruit. I am using this display with an Adafruit Matrix Portal (https://www.adafruit.com/product/4745), but wanted to move the board further inside and needed a harness to hold it while connecting it to the HUB 75 plug using jumper wires (https://smile.amazon.com/Elegoo-EL-CP-004-Multicolored-Breadboard-arduino/dp/B01EV70C78/ref=pd_sbs_1?pd_rd_w=VCvAo&pf_rd_p=2419a049-62bf-452e-b0d0-ca5b7e35a7b4&pf_rd_r=Q2HE935KPQS32PKH8ZBT&pd_rd_r=f78c02c9-5f40-421d-bb21-1b7b724c5086&pd_rd_wg=2rhGP&pd_rd_i=B01EV70C78&psc=1). Adafruit Matrix Portal - CircuitPython Powered Internet Display (https://www.adafruit.com/product/4745) I will be hanging it on the wall to replace my existing kitchen clock. 8 x M3 10mm screws are required to connect the brackets to the display. In order to protect and diffuse the LEDs, I ordered the Black LED Diffusion Acrylic Panel from tapplastics.com (https://www.tapplastics.com) Dimensions: 385mm x 190mm x 13mm / 15.2” x 7.5” x 0.5” I used simple black electric tape to secure the acrylic to the front face. The OnShape (https://onshape.com) project used to generate these STLs is available here (https://cad.onshape.com/documents/953180e31ba60af4133e9fe2/w/20c4288c43ab9a7818067a0e/e/a7793e8bf65426e9d0588a6d).

Bu model hakkında

Brackets for led matrix, Cults3D topluluğunda paylaşılan ücretsiz bir Düzenleyici ve Saklama 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.