Brackets for led matrix

Brackets for led matrix

免费 STL 收纳整理
  • 22 次浏览

该模型托管于 Cults3D。文件、图片及许可信息归原创作者所有。

在 Cults3D 查看 ↗

简介

This bracket fits the 64x32 RGB LED Matrix - 6mm pitch (https://www.adafruit.com/product/2276) from Adafruit. I am using this display with an Adafruit Matrix Portal (https://www.adafruit.com/product/4745), but wanted to move the board further inside and needed a harness to hold it while connecting it to the HUB 75 plug using jumper wires (https://smile.amazon.com/Elegoo-EL-CP-004-Multicolored-Breadboard-arduino/dp/B01EV70C78/ref=pd_sbs_1?pd_rd_w=VCvAo&pf_rd_p=2419a049-62bf-452e-b0d0-ca5b7e35a7b4&pf_rd_r=Q2HE935KPQS32PKH8ZBT&pd_rd_r=f78c02c9-5f40-421d-bb21-1b7b724c5086&pd_rd_wg=2rhGP&pd_rd_i=B01EV70C78&psc=1). Adafruit Matrix Portal - CircuitPython Powered Internet Display (https://www.adafruit.com/product/4745) I will be hanging it on the wall to replace my existing kitchen clock. 8 x M3 10mm screws are required to connect the brackets to the display. In order to protect and diffuse the LEDs, I ordered the Black LED Diffusion Acrylic Panel from tapplastics.com (https://www.tapplastics.com) Dimensions: 385mm x 190mm x 13mm / 15.2” x 7.5” x 0.5” I used simple black electric tape to secure the acrylic to the front face. The OnShape (https://onshape.com) project used to generate these STLs is available here (https://cad.onshape.com/documents/953180e31ba60af4133e9fe2/w/20c4288c43ab9a7818067a0e/e/a7793e8bf65426e9d0588a6d).

About this model

Brackets for led matrix is a 免费 3D model in the 收纳整理 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

相似模型