Pool Umbrella Stand Insert

Pool Umbrella Stand Insert

Ücretsiz STL Gadget ve Aksesuar
  • 21 görüntülenme

Bu model Thingiverse üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Thingiverse üzerinde görüntüle ↗

Açıklama

This is an umbrella pole insert for the Sofun 60 lb. Plastic Patio Umbrella Stand. The stand itself can be used as either a planter or a table, and this insert is for the table top.The problem I faced is the hole is too large. Not only does it look unfinished, it allows the pole to move. This takes care of both problems.I measured as follows:inner - 38mm (umbrella pole)outer - 50mm (table top)This print provides for 1mm of clearance and can be snapped into two pieces for easier insertion / removal.

Bu model hakkında

Pool Umbrella Stand Insert, Thingiverse topluluğunda paylaşılan ücretsiz bir Gadget ve Aksesuar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Thingiverse üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller